Osburn Matrix Wood Stove with Blower
Estimated Arrival: Between Nov 25 and Dec 02. * ETA for US orders only.
Shipping & Returns: Free Shipping. Free Returns on damaged items. Learn More.
OSBURN MATRIX WOOD STOVE WITH BLOWER
The Matrix wood stove uses the same engine as the proven Osburn 2000. However, its clean and modern look is sure to bring a European touch to your room. The top of the stove is made of cast iron with two rich pieces of soapstone, which remind us of the renowned Finnish fireplaces.
Optional soapstone side shields are also available. Logs can be conveniently placed underneath the large firebox, making the Matrix a practical and elegant heating machine.
FEATURES
MATRIX WOOD STOVE WITH BLOWER
| Fuel type : | Dry cordwood |
| Heating area : | 750 - 2,100 Ft2 |
| Maximum heat output : | 75,000 BTU/h (22.0 kW) |
• Chimney diameter: 6”
• Height X Width X Depth : 36 7/8" X 27 1/8" X 25 5/8"
• Maximum log length: 20”
• Shipping Weight: 537 lb
• Firebox nominal volume (cu. ft.): 2.4
• Recommended heating area (sq.ft.): 750 - 2,100
• Approved for a mobile home installation: Yes
• Average particulate emissions rate: 3.9 g/h
• Maximum burn time: 8 hrs
• Blower included: Yes
100% of the last 24 homeowners who have registered their warranty are satisfied with this product.
This is the manufacturer warranty:
The warranty of the manufacturer extends only to the original retail purchaser and is not transferable. This warranty covers brand new products only, which have not been altered, modified nor repaired since shipment from factory. Proof of purchase (dated bill of sale), model name and serial number must be supplied when making any warranty claim to your OSBURN dealer.
This warranty applies to normal residential use only. Damages caused by misuse, abuse, improper installation, lack of maintenance, over firing, negligence or accident during transportation, power failures, downdrafts, venting problems or under-estimated heating area are not covered by this warranty. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
This warranty does not cover any scratch, corrosion, distortion, or discoloration. Any defect or damage caused by the use of unauthorized or other than original parts voids this warranty. An authorized qualified technician must perform the installation in accordance with the instructions supplied with this product and all local and national building codes. Any service call related to an improper installation is not covered by this warranty.
The manufacturer may require that defective products be returned or that digital pictures be provided to support the claim. Returned products are to be shipped prepaid to the manufacturer for investigation. Transportation fees to ship the product back to the purchaser will be paid by the manufacturer. Repair work covered by the warranty, executed at the purchaser’s domicile by an authorized qualified technician requires the prior approval of the manufacturer. All parts and labour costs covered by this warranty are limited according to the table below.
The manufacturer, at its discretion, may decide to repair or replace any part or unit after inspection and investigation of the defect. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of any warranted but defective parts. The manufacturer shall, in no event, be responsible for any uncommon, indirect, consequential damages of any nature, which are in excess of the original purchase price of the product. A one-time replacement limit applies to all parts benefiting from lifetime coverage. This warranty applies to products purchased after June 1st, 2015.
Lifetime Parts and 5 years Labor on the following:
Combustion chamber (welds only) and cast iron door frame
Lifetime on the following parts: Ceramic glass (thermal breakage only**), Plating (defective manufacture**) – and convector air-mate. No labor
7 years parts, No labor on the following:
Surrounds, heat shields, ash drawer, steel legs, pedestal, trims (aluminum extrusions), Stainless steel firebox components, C-Cast baffle**, and vermiculite baffle**, secondary air tubes**, removable stainless steel combustion chamber deflectors and supports.
5 years parts 3 years labor: Air control mechanism, glass retainers, and handle assembly.
5 year parts no labor: Removable carbon steel combustion chamber components.
2 years parts 1 year labor: Standard and optional blowers, heat sensors, switches, rheostat, wiring, and electronics.
5 year parts no labor: Removable carbon steel combustion chamber components.
2 years parts 1 year labor: Standard and optional blowers, heat sensors, switches, rheostat, wiring, and electronics.
1 year parts only: Paint (peeling**), gaskets, insulation, firebrick, ceramic fiber blankets and other options.
All parts replaced under the warranty: 90 days parts, no labor.
All parts replaced under the warranty: 90 days parts, no labor.
*Subject to limitations above. **Pictures required
Labour cost and repair work to the account of the manufacturer are based on a predetermined rate schedule and must not exceed the wholesale price of the replacement part.
Shall your unit or a components be defective, contact immediately your OSBURN dealer. To accelerate processing of your warranty claim, make sure to have on hand the following information when calling:
Your name, address and telephone number: ·
Bill of sale and dealer’s name:
Installation configuration:
Serial number and model name as indicated on the nameplate fixed to the back of your unit:
Nature of the defect and any relevant information:
Before shipping your unit or defective component to our plant, you must obtain an Authorization Number from your OSBURN dealer. Any merchandise shipped to our plant without authorization will be refused automatically and returned to sender.
We Also Recommend
