Northwoods Grills Island Cover Compatibility Guide

Our 72- and 96-inch island covers protect an outdoor kitchen assembly rather than one grill model. Nominal island length is only the first fit check; the countertop, hood and any raised sections also matter.

Use the current Northwoods Grills cover listings below to narrow your selection. Model numbers, accessories and generation changes matter; entries that call for confirmation should be checked before purchase. Updated October 12, 2026.

Measure the complete island before choosing 72 or 96 inches

  1. Measure total length including countertop overhangs.
  2. Measure the deepest point from front to back.
  3. Measure height and the highest hood or raised bar section.
  4. Photograph any L-shaped returns, protruding appliances or custom details.

The current listings give nominal length but do not publish complete cover depth and height. Contact us with these measurements for confirmation before ordering. A six-foot or eight-foot description by itself cannot establish that a custom island will fit.

For protection of just the grill head or an individual burner, choose the appropriate appliance-specific brand guide instead.

Northwoods Grills Island cover compatibility chart

The setup column identifies the catalog-listed fit, with manufacturer-specific corrections noted where applicable. Click the cover part number for current price, availability and product details.

Northwoods Grills Island covers by appliance and configuration
Appliance or setup Cover to shop What to check
72-inch nominal island length NWG-IC-72 Depth, height, hood and overhang measurements require confirmation
96-inch nominal island length NWG-IC-96 Depth, height, hood and overhang measurements require confirmation

How to confirm your cover fit

  1. Find the model and serial label on your grill or appliance.
  2. Confirm the series, nominal size and built-in or cart configuration.
  3. For a cart, identify shelves, attached burners and the cart model; for an island, check protruding hood and countertop features.
  4. Match the complete cover listing. If the model is absent or the setup is custom, send us photos before ordering.

Common Northwoods Grills Island cover questions

Can I choose a cover by width alone?

No. Nominal grill size is not a complete cover measurement. The hood shape, control panel, cart and accessories can change the fit.

Will the same cover fit another brand?

These listings do not establish cross-brand compatibility. Choose the cover listed for your appliance or request a fit check.

What if my model is not shown?

Send the full model number, a front and side photo, and details of the cart or island. We can help check the correct cover before you buy.

When should I put the cover on?

Allow the appliance to cool completely and follow its care instructions. Let the appliance and cover dry when possible, and check periodically for trapped moisture.

Get help finding your Northwoods Grills Island cover

Speak with a Northwoods Grills product expert or call 843-212-7209. Include your model label and setup photos for a useful fit check.

Shop all grill covers · Compare cover guides by brand · Grill cover FAQs