Artisan 30" Double Access Doors ARTP-30DD - 304 Stainless Steel, Magnetic Closures

The ARTP-30DD is the entry width in Artisan's double-door range, framing into a 27 1/4" wide by 18 1/2" high cutout. Two leaves meet in the middle of that opening, so each door swings clear in roughly half the arc a single 27 1/4" door would need — the reason to choose a pair at this width when the island sits near a wall, a seating overhang or a walkway. Construction is 304 stainless steel, the same grade Artisan uses on its grill faces, so a run of grill and doors reads as one piece of cabinetry rather than parts collected from different lines. Both leaves close on magnets: no catch, no latch mechanism, just push them to. As island components go this is the straightforward one — a clean pair of stainless steel access doors over whatever storage your island frames behind them.

Key Features

• 27 1/4" x 18 1/2" cutout — the narrowest opening in the Artisan double-door range, for a nominal 30" island bay.
• Two-leaf design — the doors meet at the center of the opening, halving the swing clearance each one needs.
• 304 stainless steel construction — specified for long life and easy maintenance, and finished to match an Artisan grill.
• Magnetic closures on both doors — each leaf holds against the frame with no latch to operate.
• Face-mounted island component — width and height are fixed by the cutout; the depth of the cavity behind is set by how you frame it.
• Made in the USA — manufactured in the United States.

Specifications

Documents

ARTP-30DD Spec Sheet

Model and Installation Information

Quote this unit as ARTP-30DD. Artisan's double doors run 30, 32, 36 and 42 inches and the model codes differ by only a couple of characters, so the number is what keeps the order straight — the nominal size on the box is not the size of the hole.

The required opening for the ARTP-30DD is 27 1/4" wide by 18 1/2" high. Those are the two figures Artisan publishes for this model: the doors mount in the face of the island, so cavity depth is whatever you frame behind them. Confirm both numbers against the spec sheet linked above before the island is built or an existing opening is cut, and do not size from the 27 1/4" width of a different Artisan model — the 32" doors take a 29 3/8" opening, the 36" takes 33 3/8" and the 42" takes 39 3/8", all at the same 18 1/2" height. If your framed opening is already wider than 27 1/4", move up a size rather than trying to shim this one. No insulating liner or combustible-clearance requirement is published for these doors.

Who This Model Is Best For

Use the ARTP-30DD when the island has a nominal 30" bay and the framed opening measures 27 1/4" by 18 1/2" — typically the cabinet directly under or beside the grill, holding a tank, bulk fuel or cleaning supplies. Because it is the narrowest of the four Artisan double doors, it is also the size that fits where a wider pair would run past the framing, and the two-leaf layout keeps swing clearance short in a tight galley or against a bar overhang. Pick it when you want one clear opening covered by doors alone; there are no drawers or trash bin in this frame.

Buying From Northwoods Grills

Northwoods Grills is a family-owned retailer, and a five-minute call is cheaper than recutting masonry. Reach us at 843-212-7209 and we will confirm the 27 1/4" x 18 1/2" cutout, the model number and how these doors sit alongside the rest of your build before you order. Shipping is free and there are no credit card fees. Compare the other widths in Artisan and Grill Doors.