Artisan 32" Double Access Doors ARTP-32DD - 304 Stainless Steel, Magnetic Closures

At a 29 3/8" wide by 18 1/2" high cutout, the ARTP-32DD is the double-door pair for a nominal 32" island bay — a common width under a built-in grill, where the cabinet below has to swallow a propane tank and still leave room for the things you reach for mid-cook. Splitting that opening across two leaves is the point: a single door nearly 30 inches wide would sweep a long arc into the walkway, while two doors halve the clearance each one needs. Both are 304 stainless steel, the same grade and finish Artisan puts on its grills, and both close on magnets rather than a latch. This is a face-mounted island component, so the width and height are fixed by the cutout and the depth of the cavity is whatever your island framing gives it.

Key Features

• 29 3/8" x 18 1/2" cutout — sized for a nominal 32" bay, one step up from the 30" model's 27 1/4" opening.
• Two leaves instead of one wide door — each door needs about half the swing clearance, which matters when the island faces a wall or a seating edge.
• 304 stainless steel — specified for long life and easy maintenance, matched to the grill it sits beside.
• Magnetic closures — each leaf pushes shut against the magnet, with no latch to fight when your hands are full.
• Published width and height only — these mount in the island face, so the cavity behind them is framed to suit what you are storing.
• Made in the USA — manufactured in the United States.

Specifications

Documents

ARTP-32DD Spec Sheet

Model and Installation Information

Order and check this unit by its model number, ARTP-32DD. Artisan's 30, 32, 36 and 42-inch double doors differ by only a couple of characters in the code, and the nominal size is not the size of the opening — the model number is what keeps the two straight.

The ARTP-32DD requires a 29 3/8" wide by 18 1/2" high cutout. Only width and height are published, because the doors mount in the face of the island and the depth behind them is set by your framing. Measure the framed opening first and pick the model that matches it, rather than picking by the name on the box: the 30" pair takes 27 1/4", the 36" takes 33 3/8" and the 42" takes 39 3/8", with the 18 1/2" height shared across the range. Confirm both figures against the spec sheet above before the island is built or an existing opening is enlarged. No insulating liner or combustible-clearance requirement is published for these doors.

Who This Model Is Best For

This is the pair to specify when the island is framed for a nominal 32" bay and the opening measures 29 3/8" by 18 1/2" — wide enough that the cabinet behind can take a standard propane tank plus storage, but narrower than the 36" and 42" units that need a longer run of island to sit in. The two-leaf layout earns its keep in exactly this width, where a single door would be unwieldy in a galley layout or in front of bar seating. It is doors only: no drawer stack and no trash bin in this frame.

Buying From Northwoods Grills

Northwoods Grills is family-owned, and we would rather check a number with you than have doors arrive that miss a finished opening by an inch. Call 843-212-7209 and we will confirm the 29 3/8" x 18 1/2" cutout, the model number and how these doors fit the rest of your island before you order. Shipping is free and we add no credit card fees. Compare widths across Artisan and Grill Doors.