Artisan 32" Access Door and Double Drawer Combo ARTP-DDC-32SC - 304 Stainless Steel, Right Hinge

The ARTP-DDC-32SC puts two kinds of storage into one 32" island opening: a right-hinged access door for the tall things — a propane tank, bulk charcoal, a bin of supplies — and a stack of two drawers alongside it for tools, utensils and small goods. It is a single frame with a single cutout rather than a door and a drawer unit bought separately, so there is one opening to build and one set of edges to line up against your grill. Everything is 304 stainless steel, the grade Artisan uses across its outdoor kitchen components for corrosion resistance and easy maintenance. The door closes on magnets with no latch to operate, and both drawers ride full-length soft-close glides that pull out far enough to reach the back and draw themselves shut at the end of the travel.

Key Features

• Door and two drawers in one frame — open storage behind the door plus a two-drawer stack, all in a single 32" unit with one cutout.
• Full-length soft-close drawer glides — the drawers extend for access to the back and close under control instead of slamming.
• Right-hinged access door — magnetic closure, no latch or catch to operate.
• 29 1/2" W x 19 3/4" D x 18 1/2" H cutout — a combo publishes a depth figure as well as width and height, because the drawers use the full run of the opening.
• 304 stainless steel construction — matched to Artisan grills so the faces and handles read as one run of cabinetry.
• Made in the USA — manufactured in the United States.

Specifications

Documents

ARTP-DDC-32SC Spec Sheet

Model and Installation Information

The model is ARTP-DDC-32SC and it needs an opening of 29 1/2" wide by 19 3/4" deep by 18 1/2" high. Frame to those three figures before the unit arrives — a combo carries both a door and a drawer stack in one chassis and cannot be trimmed to fit. Depth matters here in a way it does not on a plain door pair, because the drawers use the full run of the opening; confirm the island can give up 19 3/4" behind the face.

The door is right-hinged. That is how this model is built, not an option chosen at checkout, so plan the layout around a door that opens to the right — check what it will swing toward and where someone stands to load the drawers. Verify all three cutout figures against the ARTP-DDC-32SC spec sheet linked above before the island is built or an existing opening is modified, and do not reuse the 33 5/8" width published for the 36" ARTP-DDC-36SC. No insulating liner or combustible-clearance requirement is published for this unit.

Who This Model Is Best For

Take this one when a 32" bay has to do two jobs at once and you only want to cut one hole. The door side handles the tank or the bulk items that will not fit a drawer; the two drawers keep tongs, thermometers and small supplies off the counter and within reach of the grill. Against the 36" ARTP-DDC-36SC the difference is drawer width, not drawer count — both are two-drawer layouts — so pick this size when the framed opening measures 29 1/2" rather than 33 5/8", and take the wider model only if the island actually has the run for it.

Buying From Northwoods Grills

Northwoods Grills is a family-owned retailer, and on a combo there are three cutout figures to get right instead of two. Call 843-212-7209 and we will confirm the 29 1/2" x 19 3/4" x 18 1/2" opening, the right-hand hinge and how the unit sits with the rest of your island before you order. Shipping is free and there are no credit card fees. See both sizes in door and drawer combos, and the wider line in Artisan.