Artisan Professional 32" Built-In Grill - 3 Burners, 60,000 BTUs, 304 Stainless Steel with Rotisserie

Built to sit permanently in a masonry or framed outdoor kitchen island, the ARTP-32 is the three-burner entry point to Artisan's Professional series. It puts 60,000 BTUs of main burner output across a 32" cooking surface and adds the two things that define the Professional line over Artisan's American Eagle grills: a 15,000 BTU ceramic infrared rear burner paired with a heavy-duty rotisserie system, and 110V electronic ignition that also powers the interior work lights and illuminated control knobs. The whole grill head is 304 stainless steel, designed and manufactured in the USA. It is ordered in either natural gas or propane, and it drops into a 30 1/2" wide opening, which makes it a practical centerpiece for compact islands where a 36" or 42" head would crowd the counter runs on either side.

Key Features

• Three stainless steel U-burners — 20,000 BTUs each, for 60,000 BTUs of main burner output spread evenly across the 32" grilling surface.
• 15,000 BTU ceramic infrared rear burner — drives the included heavy-duty rotisserie system for properly roasted meats and poultry.
• 110V electronic ignition — quick, reliable startup; requires a 110V supply inside the island, which also runs the lighting.
• Interior and knob lighting — interior halogen work lights over the grates plus blue LED-lit control knobs for cooking after dark.
• Seamless double-walled hood — spring assist makes it easy to lift, and the double wall locks in heat for lid-down roasting.
• Air curtain chimney design — vents heat away from the front so the recessed control panel stays comfortable to reach across.
• 1/2" thick ceramic briquettes — sit beneath the grates and even out the flame across the full width of the cooking surface.
• Heavy-duty stainless steel cooking grates — matched with a dual-position, lift-up stainless warming rack.
• Fully adjustable brass valves — precise temperature control from low-and-slow through searing heat.
• Built-in hood thermometer — lets you roast to a reading instead of a guess.
• 304 stainless steel construction — designed and manufactured in the USA.

Specifications

Warranty

Documents

Care and Use Manual ARTP-32

Parts Manual ARTP-32

Spec Sheet ARTP-32

Model and Installation Information

This is model ARTP-32, a built-in grill head with no cart, base or legs — it is designed to be dropped into an island you build or modify to suit it. Frame the opening 30 1/2" wide by 19 3/4" deep by 9 1/2" high. The grill head itself measures 31 7/8" wide, 26 3/8" deep and 23 1/8" high, so the trim flange overlaps and conceals the edges of the opening. Confirm these figures against the ARTP-32 spec sheet above before the island is built or modified, since a cutout that is cut short cannot easily be corrected afterwards.

Because the ARTP-32 uses a 110V electronic ignition, the island needs a 110V outlet as well as a gas line. That same supply runs the interior halogen work lights and the LED knobs, so plan the electrical rough-in at the same time as the gas. Natural gas and propane are ordered as two separate configurations with different burner orifices — choose the one that matches the supply already run to your island rather than planning to change fuel later.

Two sets of BTU numbers are published for this grill, and both come from Artisan. The nominal ratings — 60,000 BTUs across the three main burners plus the 15,000 BTU rear burner — are what a gas fitter should size the supply line from. Artisan also publishes a certified total rated input of 69,000 BTU/hr for the appliance, rear burner included, certified to ANSI Z21.58 / CSA 1.6; the rating and orifice size for your individual grill are printed on its serial plate, as the care and use manual above explains.

Who This Model Is Best For

Choose the ARTP-32 if you are building a compact outdoor kitchen island and want rotisserie capability without giving up counter space to a wider grill head. Three burners and 60,000 BTUs suit everyday cooking for a family and the occasional group, while the 15,000 BTU infrared rear burner means a whole chicken or a pork loin can turn on the spit at the same time the front burners work. It is the right pick when a 36" or 42" Professional head would leave too little room for prep surface on either side, and when you would rather put the extra budget into the lighting, rotisserie and 110V ignition that separate the Professional series from the American Eagle built-ins.

Buying From Northwoods Grills

Northwoods Grills is a family-owned retailer, and we are glad to confirm specifications, fuel type, cutout dimensions and compatibility with you before you order — call us at 843-212-7209. Shipping is free and we never add credit card fees. Shop the full Artisan range, compare options across our Built-In Grills collection, or read our Expert Advice blog for outdoor kitchen planning guides. For this model we also stock the Artisan Vinyl Cover for 32" Built-In Grill ART-32CV and the Artisan 14" x 24" Drop-In Griddle Plate.